Digital Connections - Kenwood KRF-X9050D Instruction Manual

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
R L
75 s
AM 10kHz
FM 100kHz
50 s
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
DVD
VIDEO 2
COAXIAL
COAXIAL DIGITAL
OUT (AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
S VIDEO PLAY IN REC OUT PLAY IN PLAY IN PLAY IN
L
MONITOR
OUT
DVD VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 3
R
R
R
A
R L C
CD/DVD VIDEO 3 MONITOR
OPTICAL OPTICAL OPTICAL
DIGITAL IN DIGITAL OUT
OPTICAL DIGITAL OUT
(AUDIO)
Optical fiber cable
OPTICAL DIGITAL OUT
(AUDIO)
COAXIAL DIGITAL OUT
(AUDIO)
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
B
L
L
OPTICAL DIGITAL
IN (AUDIO)
MD player
Component with DTS, Dolby
Digital, or PCM OPTICAL
DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See
components".)
CD player
Component with DTS, Dolby
Digital, or PCM COAXIAL
DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video compo-
nents".)
LD player
Setting up the system
8
"Connecting video
0
0
11