Connecting Accessories - Philips Impact Plus FC8388 User Manual

Connecting accessories

C
1 To connect the hose, push it into the appliance and turn it
clockwise.
To disconnect the hose, turn it anticlockwise and pull it out of the
appliance.
C
2 Connect the tubes to each other and to the handgrip by
inserting the narrow section into the wider section while
turning it a little.The tube with the clip is the lower tube.
You can connect the accessories in the same way.
Disconnect the accessories and tubes by pulling them and turning them
a little.
C
3 Telescopic tube (type FC8388 only):
Adjust the tube to the length you find most comfortable during
vacuum cleaning.
4 The combi nozzle can be used on either carpets (without
brush) or hard floors (with brush):
C
Push the rocker switch on top of the combi nozzle with your foot
to make the brush strip for cleaning hard floors come out of the
nozzle housing.
C
Push the rocker switch on the other side to make the brush strip
disappear into the housing.
ENGLISH
7