Motor Protection Filter - Philips Impact Plus FC8388 User Manual

C
2 Place the sides (1, 2) and the bottom edge (3) of the new filter
properly behind the ridges of the holder.
C
3 Put the holder back into the vacuum cleaner by first hooking
the bottom edge of the holder into the appliance (1) and then
pushing the holder towards the appliance (2) until it snaps
home.
Make sure the filter holder has been placed properly.

Motor Protection Filter

Replace the Motor Protection Filter when you insert the first of a new
set of dustbags.
If you are using the cotton dustbag, wash the Motor Protection Filter in
lukewarm water once a year.
Make sure the Motor Protection Filter is completely dry before you
put it back into the appliance.
C
1 Switch the appliance off and open the cover.Take out the filter
holder and remove the filter.
2 Insert a new filter into the holder with the white side facing
upwards and place the holder back.
Two AFS Micro Filters and one Motor Protection Filter are available
under type number FC8032.
Environment
To make recycling possible, the plastics used for this appliance have
been coded.
The cardboard packaging has been made of recycled material and is
fully recyclable.
Insufficient suction power
1 Check if the dustbag needs to be replaced.
2 Check if the filters need to be replaced.
3 Check if the slide on the handgrip is closed.
ENGLISH
11