Features; Mixed Peripheral Support - Qlogic QLA2000 Hardware Installation Manual

Features

1.3
Features
Compliance with Intel PCI version 2.1 specification
Compliance with Third Generation Fibre Channel Physical and Signaling
Interface (FC-PH-3) standard
Compliance with Fibre Channel-Arbitrated Loop (FC-AL) standard
Compliance with U.S. and international safety and emissions standards
Support for bus master DMA
Fast!UTIL BIOS utility to customize the configuration parameters on the
QLA2xxx board and attached drives
Two independent channels on a single board. Channel one has an external
optical connector and an internal copper connector. Each individual
connector (or both connectors) can be used without manual configuration.
(QLA2102F board)
1.3.1

Mixed Peripheral Support

Simultaneous mixed-peripheral configurations and bootable device support for FC
devices that meet the following standards:
Fibre Channel – Private Loop Direct Attach Technical Report (FC-PLDA)
Fibre Channel – Fabric Loop Attachment Technical Report (FC-FLA)
1-2
1 – Introduction
FC0151102-00 D