Toshiba RAV-SM2244AT8-A Service Manual page 108

No. Part name
1. Detachment
Fan guard
13
1) Carry out work of item 1. of
To prevent scratches to the product, carry out the
work on cardboard, cloth, etc.
2) Remove the discharge port cabinet and place the
3) Remove the fixing screws for the fan guard.
4) Remove the discharge port cabinet and then put on
5) Remove the screws fixing the bellmouth.
6) Remove bellmouth.
7) Press and remove hooking claw of fan guard with a
2. Attachment
1) Press the projection on the upper side of the fan
Check that all the hooking claws are fixed at the
specified positions.
2) After mounting, fix the fan guard with screws.
3) Attach and mount the claws (3 positions) on the
4) After mounting, fix with a screw.
Procedure
CAUTION
fan guard side facing upwards.
(Hexagonal screws Ø4 × 10, 2 pcs.)
it so that the fan guard side faces downward.
(ST1T Ø4 × 8, 2 pcs.)
flat screwdriver.
guard into the hole of the discharge cabinet and
then push in the hooking claws.
Fix the claws by using your hands to press the
hooking claws (5 positions).
CAUTION
(Hexagonal screws Ø4 × 10, 2 pcs.)
upper side of the bellmouth in the square hole of
the discharge cabinet.
(ST1T Ø4 × 8, 2 pcs.)
 ƒ
and 1. of above.
– 108 –
Remarks
Remover screw
(2 pcs.)
Discharge port cabinet Discharge port cabinet Discharge port cabinet
Remove screw (2 pcs.) Remove screw (2 pcs.) Remove screw (2 pcs.)
Discharge port cabinet Discharge port cabinet Discharge port cabinet
Flat Flat Flat
screwdriver screwdriver screwdriver Fan guard Fan guard Fan guard
Hooking claw Hooking claw Hooking claw
Discharge port cabinet Discharge port cabinet Discharge port cabinet
Square hole Square hole Square hole
(3 positions) (3 positions) (3 positions)
Bellmouth Bellmouth Bellmouth
Claw (3 positions) Claw (3 positions) Claw (3 positions)
Bellmouth Bellmouth Bellmouth
Bellmouth Bellmouth Bellmouth