Eptz Setting - Vivotek VC8201 User Manual

7.32 ePTZ setting

Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER
osdzoom
smooth
tiltspeed
panspeed
zoomspeed
autospeed
panoramicspeed
rotatespeed
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support
ePTZ. (capability.eptz > 0)
PARAMETER
patrolseq
patroldwelling
preset_i<0~19>_name
(capability.eptz > 0)
VALUE Default
<boolean> 1
<boolean> 1
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
1 ~ 5 1
1 ~ 5 1
1 ~ 5 1
VALUE Default
string[120] <blank>
string[160] <blank>
string[40] <blank>
SECURITY DESCRIPTION
(get/set)
1/4 Indicates multiple of zoom in is
"on-screen display" or not
1/4 Enable the ePTZ "move smoothly"
feature
1/7 Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Pan speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Zoom speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/4 Panoramic speed.
It's only used in Vivotek plug-in.
1/4 Rotate speed
It's only used in Vivotek plug-in.
SECURITY DESCRIPTION
(get/set)
1/4 The patrol sequence of ePTZ. All
the patrol position indexes will be
separated by ","
1/4 The dwelling time (unit: second)
of each patrol point, separated by
",".
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi
rather than by setparam.cgi.)
VIVOTEK
User's Manual - 181