Vivotek VC8201 User Manual page 150

VIVOTEK
7.9 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
brightnesspercent
saturation
saturationpercent
contrast
contrastpercent
sharpness
sharpnesspercent
gammacurve
lowlightmode
dnr_mode
dnr_strength
150 - User's Manual
VALUE DEFAULT
-5~5,100 100
0~100 0
-5~5,100 100
0~100 50
-5~5,100 100
0~100 50
-5~5,100 100
0~100 50
0~100 0
0~1 1
0~1 1
1~100 50
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image.
100 is percentage mode.
4/4 Adjust brightnesspercent of
image when brightness=100.
4/4 Adjust saturation of image.
100 is percentage mode.
4/4 Adjust saturation value of
percentage when
saturation=100.
4/4 Adjust contrast of image.
100 is percentage mode.
4/4 Adjust contrastpercent of image
when contrast=100.
4/4 Adjust sharpness of image.
100 is percentage mode.
4/4 Adjust sharpness value of
percentage when
sharpness=100.
4/4 Gamma curve.
(Only used in CU8171)
4/4 Enable/disable low light mode
4/4 0:disable
1:enable
4/4 Strength of DNR