Vivotek IP3111/3121 User Manual
  1. Manuals
  2. Brands
  3. Vivotek Manuals
  4. Security Camera
  5. IP3111/3121
  6. User manual
Vivotek IP3111/3121 User Manual

Vivotek IP3111/3121 User Manual

Vivotek user's manual network camera ip3111/3121
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Vivotek IP3111/3121

Summary of Contents for Vivotek IP3111/3121

  • Page 2: Before You Use

    "Advanced functions" to get creative ideas. To those professional developers, "URL Commands of Network Camera" will be a very helpful reference. Those paragraphs preceding by should be fully understood and cautioned. Ignoring the warnings may result in serious hazards. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 3: Table Of Contents

    Ethernet Environment... 13 Hardware installation...13 Cable connection...13 Power on ...14 Software configuration ...15 Easy way with installer program...15 Manual way with existing programs ...20 First access to Network Camera ...21 Modem Environment... 23 Hardware installation...23 Cable connection...24 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 4 One-shot fast configuration via FTP ...60 Advanced functions ...68 Viewing system log ...68 Viewing system parameters...68 Restore factory default settings...68 Uploading snapshots periodically to an external FTP server ...69 Customizing homepage images...69 Viewing system log ...69 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 5 System resource URL ...77 General format of command URL ...77 System configuration URL ...77 Security configuration URL...78 Network configuration URL ...78 Video configuration URL...79 Image quality configuration URL ...80 Camera configuration URL...81 Camera custom command configuration URL...81 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 6 Modem configuration URL...82 Application configuration URL ...82 Homepage layout configuration URL ...83 Appendix... 84 A. POST procedure...84 B. Frequently asked questions ...85 C. Technical specifications ...88 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 7: Package Contents

    Package Contents Network Camera IP3111/IP3121 Power adapter Null modem cable I/O terminal block connector Software CD Quick installation guide Warranty card www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 8 Camera control cable www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 9: Physical Description

    This RS232 serial port can connect with a modem or included null modem cable to utilize dial-up network when Ethernet is not available. If Network Camera operates with Ethernet interface, administrators may use this port to control custom Pan-Tilt device. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 10: General I/O Terminal Block

    The relay switch can be used to turn on or off external devices. INPUT (Max. 50mA, 12VDC) INPUT (short with NC at initial state) OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) (inverting) (non-inverting) www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 11: Status Leds

    If either of the above is not the case, Network Camera will try the interface of PPP with null modem. Network Interface Condition Ethernet before installed after installed during camera control PPP with modem after POST PPP with null modem before connected after connected LED2 (Heartbeat) LED3 (Status) flash flash Flash flash flash www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 12: Restore Button

    The pin assignment of the auto iris lens connector is as follows: VIDEO Drive DC Drive Pin 1 Power source Damp- Pin 2 Video signal Damp+ Pin 3 Not used Driver+ Pin 4 Ground, Shield Driver- www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 13: How To Install

    In the following content, "user" refers to those who can access Network Camera and "administrator" means the supervisor who has the root password to configure Network Camera in addition to general access. Administrators should carefully read this manual, especially during installation. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 14: Ethernet Environment

    Shut down all the peripheral devices prior to connection. Connect the supplied cables from Network Camera to related devices according to the following steps. Note that the power adaptor must be kept unplugged until other cables are firmly connected. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 15: Power On

    Refer to the configuration section for further information. Connect the power jack of the power adapter to Network Camera prior to plugging the utility end into the utility power socket. It will reduce accidental electric surge shock. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 16: Software Configuration

    0.0.0.0 for a brand new unit. When multiple units are mounted, there may be several entries shown in the window. Administrators may click on each entry with "Assigned" field labeled "No" to install sequentially. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 17 Otherwise the unit will need installation whenever it is restarted. When IP and options are O.K., click on . A message window will pop open to inform if the www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 18 If the IP is not taken by another network device in the network, the Installer program will continue with the setup. Otherwise another message window will warn that the assigned IP conflicts. In this case, administrators should ask the network supervisor for a vacant IP address. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 19 , the "Assigned" field will be labeled "Yes". Administrators may click directly to access the newly installed server in the default browser. While checking “Use this IP whenever system boots”, a dialog window may pop out to ask for “Server www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 20 IP address, the administrator may reserve the IP from DHCP service and assign it with name in the domain name service. During Network Camera installation, assign the ready IP address. After successful installation, users may access the Network Camera by the given name. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 21: Manual Way With Existing Programs

    Network Camera has accepted the assigned IP address and is ready for access. The first several ping requests may fail during the self-configuration period of Network Camera. Since the accurate grammar of ARP and PING depends on the operating system, refer to its related help manual. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 22: First Access To Network Camera

    IP address is already reserved for this Network Camera. Clearing this option will skip the installation procedure during the next power-up and use the previous settings. If the install option stays checked, Network Camera will perform the www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 23 Details about configurations are described in the "How to Use" section. Related figures are attached for easy reference. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 24: Modem Environment

    Dial-out connection denotes an active Network Camera to dial out to the other end of a dial-up server or any Internet service provider, abbreviated as ISP, to request a point-to-point connection. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 25: Cable Connection

    Connect the power jack of the power adapter to Network Camera prior to plugging the utility end into a utility power outlet. It will reduce accidental electric surge shock. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 26: Software Configuration

    Camera and any COM port of the PC for initial setup. Install a new modem Open the control panel and double click the modems icon. Check "Don't detect my modem..." item and click on to install a new modem. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 27 From (Standard Modem Type) choose the Standard 33600 bps Modem and click on www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 28 Choose the serial port that the included null modem cable is attached to and click on . The null modem is now ready for use. If no Dial-Up adapter exists in the system, Windows will automatically prompt to install. Press continue. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 29: Setup A New Connection

    After the 33600 bps modem is installed, open the dialup network folder in Windows to build a new connection. Select the device as the newly installed standard 33600 bps modem and click on Just enter arbitrary digits as phone number and click on . The phone number used here is not www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 30 After clicking on , this new connection will display in the Dial-up Networking folder and will be used for null modem connections. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 31 Right-click on the newly setup connection icon for properties. In the first General page, clear "Use area code and Dialing Properties" option and click on www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 32 Select 115200 as the speed and click on On the second page, only check "Enable software compression" and "TCP/IP" while leaving others blank. Keep other settings as default values and click on . Now the connection is ready for null modem connection. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 33 After connection is established successfully, go to the next section, "First access to Network Camera". If an error message indicates a hardware error while connecting for the first time, especially in a Windows 2000 environment, try again to recovery the possible detection failure. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 34: First Access To Network Camera

    Note that the new password will also be used in the next dialup. To make Network Camera successfully work in dial-in and dial-out modes, follow the procedures below for basic configurations. If people other than the administrator will be allowed to use Network Camera, www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 35 Camera in advance for modem connection, administrators cannot connect again without restarting the system. If dial-out configuration is activated, Network Camera will dial out to send a system startup log to test and drop the call after the pre-configured period. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 36: How To Use

    Open your web browser and connect to Network Camera just like a general web site and the audio and video will present on demand. Make sure the web address of the target Network Camera is accurate. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 37: Authentication

    The user may check the option to save the password for future convenience. If it is initial access to Network Camera in Windows, the web browser will ask to install a new plug-in www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 38 Users may click on to install the plug-in. If the web browser does not allow the user to install, check the Internet security option to lower security levels or contact network supervisors. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 39: Primary User's Capability

    There might be some windows enclosed by red lines shown in the image as soon as motion is detected in the related windows. Click on the configuration link to the right of the image window to enter the configuration page. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 40: Pan/Tilt Positioning Device Control

    <Network Camera> is the domain name or pure IP address of Network Camera. Client Setting If it is the first access to “Client Setting” page in Windows, the web browser will ask to install a new www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 41 If you don’t know which protocol you should choose, select the UDP protocol and the client will try these protocols in this order, UDP → TCP → HTTP. After the client connects to the Network Camera successfully, “Protocol Option” will be set as the working protocol automatically. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 42: System Configuration

    There are two methods provided for configuration. Web interface is quite easy and clear to use and FTP with script file is rapid for mass installation. System configuration can be accessed only by administrators. Administrators may type the URL below the figure to directly enter the configuration page. If www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 43: System Parameters

    URL, read the section on advanced usage for reference. <url> http://<Network Camera>/setup/config.html <Network Camera> is the domain name or original IP address of Network Camera. System parameters www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 44 DNS server is available. Do not forget to set the "Time Zone" offset for local settings. It only affects the hour in NTP method. Click on to validate changes. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 45: User Group Administration

    Since only administrators can change a user's password, confirmation for a user's password is not necessary. To delete a user, pull down the user list to find the user name to be deleted and press www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 46: Network Settings

    This option is ignored in the PPP connection. Administrators may modify the network settings to fit into existing networks. Some broadband service subnet mask may differ from the default value 255.255.255.0 and service providers may assign some www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 47 If the Network Camera works in variation or low bandwidth (comparing with video bandwidth) environment, the client side will receive the poor quality of media. For improving this situation, you can check the “Improve audio quality in low bandwidth environment” item. It can make the audio quality www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 48 Administrators should notice that the IP address, subnet mask, default router and DNS servers will be cleared when the network interface is switched to the other. Refer to the related section of Ethernet or modem for software installation. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 49: Video Codec Parameters

    Of course the image is not as good as normal. Half×2 is especially suited to low bandwidth environments like a dial-up network. IP3111/IP3121 uses MPEG4 codec compression for best streaming solution. The compressed video data www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 50 Motion detection will increase system load. Enter the motion detection option page for advanced configuration. To adjust video from external cameras, use "Flip" to map the video vertically and "Mirror" to map the video horizontally. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 51 When the image is O.K., press to memorize the image settings or to recall the original settings. If parameters are changed without saving, they will be used until the next system startup. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 52: Motion Detection

    , a graphic bar will go up or down depending on the image variation. A green bar means the image variation is under monitoring level and a red bar means the image variation is over monitoring level. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 53 The following figure shows the screen when is clicked. The monitoring windows will be marked by red squares. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 54: Camera Positioning Device Configuration

    ASCII format command to binary string. For instance, “012000ABCD” will be sent out of the COM port as five hexadecimal bytes of 01, 20, 00, AB and CD. If the command string is composed of two or www.vivotek.com T: 886-2-22404099...
  • Page 55 "Display string" is for those texts on command buttons and should be less than 8 characters. To enter more commands or commands other than pan and tilt, a flexible URL is provided for customized interface. See the “Clear data path for proprietary commands” section in Advanced functions for details. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 56: Modem And Dialup Settings

    An incorrect dialing prefix may cause Network Camera to fail when dialing out. "Redial attempts" means how many times Network Camera should try to connect to each ISP. Setting the value in "Disconnect after minutes" will force Network Camera to drop the connection when there is no activity www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 57 When using modem as the network connection, Network Camera will mute the audio automatically, and send video only because the low bandwidth environment doesn’t meet the requirement for both. In the Client setting page, protocol option will be set as Http protocol. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 58: Application

    The remote folder of snapshot files for FTP can be configured on the network page. The snapshot period is between "Snapshot begin" and "Snapshot end" and it will repeat everyday. The snapshot interval is set in "Snapshot every seconds". www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 59 "Trigger action" settings. The application settings should be carefully examined to operate accurately. If administrators are not sure of the digital output status before configuring applications, "Reset output" can be used to return the digital output to the default “Normal Close” state. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 60: Homepage Layout Settings

    The "font color" and "background color" can be chosen from sixteen colors to achieve the best visual effect. See "Customizing homepage images" section in "Advanced functions" for how to replace images. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 61: One-Shot Fast Configuration Via Ftp

    ******* sample file ********** Network Camera Initial Configuration File [SYSTEM] <reset system> Reset system after reading CONFIG.INI or NO <host name> Network Camera String shorter than 40 characters <serial number> www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 62 <user password> Read only string Read only string year/month/date. Read only string hour/minute/second. Read only string From 12 to -12 Read only string String shorter than 15 characters The followings are as same as above www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 63 7 for gray, 8 for yellow, 9 for lime, 10 for aqua, 11 for fuchsia, 12 for silver, 13 for red, 14 for blue, 15 for teal 0 for blank, 1 for default image or 2 for loading from URL www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 64 8 characters(some language will use double bytes) no longer than 8 characters(some language will use double bytes) or NO obsolete Read only string Standard IP format Standard IP format Standard IP format Standard IP format www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 65 String shorter than 15 characters String shorter than 15 characters String shorter than 40 characters Standard IP format or string shorter than 40 characters String shorter than 15 characters String shorter than 15 characters String shorter than 40 characters www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 66 YES for fix bit rate, NO for fix quality 1200k, 1000k, 768k, 512k, 384k, 256k, 128k, 64k 1, 2, 3, 5, 10, 15, 20, 25, 30 (30 for NTSC only) 1, 2, 3 representing half, halfx2, normal www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 67 String shorter than 80 characters String shorter than 80 characters String shorter than 80 characters String shorter than 80 characters String shorter than 80 characters String shorter than 80 characters String shorter than 80 characters www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 68 String shorter than 80 characters String shorter than 80 characters for none, 1 for sequential mode, 8 for event mode, 9 for both 0 for FTP, 1 for email or NO 24 hours format 24 hours format www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 69: Advanced Functions

    After confirmation, the system will restart and require the installer program to setup the network. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 70: Ftp

    Viewing system log Download SYSTEM.LOG and open it with any text viewer. The content of the file reveals useful File name Logo and background share 8000 bytes Logo and background share 8000 bytes 2000 bytes Maximal size www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 71: Uploading The Configuration File

    Network Camera is able to keep the most up-to-date software. Customers are allowed to download the updated binary codes upon receiving additional license from Vivotek and consequently upload it to Network Camera via FTP. This function is open to administrators only. The updated system code may be in compressed format and have name coded with version.
  • Page 72 If power fails during the software upgrade, the program in the memory of Network Camera may be destroyed permanently. If Network Camera cannot restart properly, ask the dealer for technical service. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 73: System Core Debugging

    DI changes to H, terminal will display only DI=H Stop information dumping Typing "stop" will cease dumping debug information and digital input status. Query status of digital inputs Typing "diquery" will display the status of digital input once. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 74: Set Digital Outputs

    Typing "clear" will make Network Camera restore factory settings but not restart. To validate new settings, type "reset" to make the system restart. Reset system Typing "reset" will make Network Camera perform a software reset. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 75: Url Commands Of Network Camera

    This URL applies to the attached serial port device including supported PTZ cameras or non-supported custom cameras. Note the serial port settings of custom cameras must be correctly defined in advance. Send command to device attached to COM /cgi-bin/senddata.cgi?data=123456,ABCDEF&flush=yes&wait=1000&read=6 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 76: Restore Factory Default Settings

    ASCII coded hexadecimal value, e.g., 0x41, 0x42, 0x43 read from COM port will show in returned homepage as 414243 instead of ABC. Restore factory default settings /setup/restore.cgi Network Camera will automatically restart after restoring factory default configurations. Restart system /setup/reset.cgi Restart Network Camera without warning. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 77: Page Url

    Referenced URL /client.html /setup/config.html /setup/system.html /setup/security.html /setup/network.html /setup/video.html /setup/image.html /setup/camera.html /setup/modem.html /setup/command.html /setup/custom.html /setup/app.html /setup/layout.html /setup/logfile.html /setup/parafile.html /setup/factory.html www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 78: System Resource Url

    NTP server to synchronize directly adjust date and time year, month and date separated by slash hour, minute and second separated by colon NTP server time zone, 8 means GMT +8:00 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 79: Security Configuration Url

    DNS server secondary DNS server primary SMTP server secondary SMTP server HTTP port Control Channel port Video Channel port Audio Channel port enable the low bandwidth environment disable the low bandwidth environment primary FTP server www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 80: Video Configuration Url

    384K bps set bit rate to 512K bps set bit rate to 768K bps set bit rate to 1000K bps set bit rate to 1200K bps set maximum frame rate to 1 fps www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 81: Image Quality Configuration Url

    DESCRIPTION adjust brightness of image adjust contrast of image adjust hue of image adjust saturation of image not save the parameters recall the original settings save the parameters www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 82: Camera Configuration Url

    1 of COM button name of custom command 2 of COM button name of custom command 3 of COM button name of custom command 4 of COM button name of custom command 5 of COM www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 83: Modem Configuration Url

    DESCRIPTION event mode application sequential mode application upload snapshots by email upload snapshots by FTP FTP file with date and time suffix seconds delay to detect next event seconds delay to capture post-event www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 84: Homepage Layout Configuration Url

    DESCRIPTION hide logo use default logo use image from URL hide background image use default background use image from URL color index for font color index for background www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 85: Appendix

    Ethernet interface failure includes not only components on board but also Ethernet cable and the devices of the opposite end. Possible failed component U1(TM1300) U6(RTL8139C) U6(RTL8139C), U7, U8 U22(M5823) U19(16C1550CJ), P2 Failed function Video decoder PCI bridge of TM1300 Ethernet controller Ethernet interface* Real-time clock COM interface www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 86: Frequently Asked Questions

    UART FIFO lower in both receiving and transmitting from modem property in the control panel. While in Ethernet, it may be due to time taken in storing www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 87 You may also change the HTTP port to non-public number. You can check the system log to examine any abnormal activities and trace the origins. Q. I have a PTZ camera that is not on the supported list. How can I control it? www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 88 Q. I try to connect my black-and-white and color cameras with Network Camera but the image is not good. A. Although Network Camera allows users to choose color or black-and-white images for each camera, hybrid camera types may increase video processing time and reduce system performance. www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...

  • Page 89: Technical Specifications

    15 digits password protection Optional Software Record and play pictures on PC hard disk I/O ports monitoring feature LED Indicator Status indicators Network link indicator Power 12V DC, 1.2A external power supply 6-15V DC, min. 15W www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 90 Vivotek Inc. cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

This manual is also suitable for:

Ip3111Ip3121

Table of Contents