Vivotek VC8201 User Manual page 155

setparamlevel
7.20 SNMP
Group: snmp (capability.snmp > 0)
NAME
v2
v3
secnamerw
secnamero
authpwrw
authpwro
authtyperw
authtypero
encryptpwrw
encryptpwro
encrypttyperw
encrypttypero
rwcommunity
rocommunity
syslocation
syscontact
0~2 0
VALUE DEFAULT
0~1 0
0~1 0
string[31] Private
string[31] Public
string[8~128] <blank>
string[8~128] <blank>
MD5,SHA MD5
MD5,SHA MD5
string[8~128] <blank>
string[8~128] <blank>
DES DES
DES DES
string[31] Private
string[31] Public
string[128] <blank>
string[128] <blank>
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
6/6 Show log of parameter setting.
0: disable
1: Show log of parameter
setting set from external.
2. Show log of parameter setting
set from external and internal.
SECURITY DESCRIPTION
(get/set)
6/6 SNMP v2 enabled. 0 for disable,
1 for enable
6/6 SNMP v3 enabled. 0 for disable,
1 for enable
6/6 Read/write security name
6/6 Read only security name
6/6 Read/write authentication
password
6/6 Read only authentication
password
6/6 Read/write authentication type
6/6 Read only authentication type
6/6 Read/write passwrd
6/6 Read only password
6/6 Read/write encryption type
6/6 Read only encryption type
6/6 Read/write community
6/6 Read only community
6/6 System location
6/6 System contact
VIVOTEK
User's Manual - 155