Table of Contents
Advertisement
Hardware Installation
Overview
The weather station assembly takes several steps, and should be performed in the following order.
1) Assemble the mounting kit. Tripod, mast, and arm.
2) Attach the weather station control box. Run appropriate conduit for power and communications to the control box.
3) Attach individual sensors to the weather station.
4) Using a computer or laptop, configure the weather station and the AcquiSuite (or other Modbus data acquisition
server).
The following sections of the manual cover hardware installation and component details for each of the steps listed above.
Page 8
Draft Copy
A89WS Weather Station (gen 3)
Advertisement
Table of Contents
