Table of Contents
Advertisement
Overview
The Obvius weather station is designed to provide measurement options for environmental data points related to Solar/PV
generation sites. The weather station can provide readings for wind speed, direction, solar radiation, air temperature,
humidity, and solar panel temperature.
Installation Checklist
The installation of the Obvius weather station requires a number of tools and supplies to complete the installation. The
following list provides a representative sample of what may be required for installation, however site specific issues may
require additional tools or supplies.
The weather station power and communications connections require a licensed electrician or similarly qualified installer.
Required:
Adjustable Crescent wrench
•
Screw Drivers: Philips and flat-head, small and medium sizes.
•
Weatherproof conduit for power and communications to the weather station control box.
•
Drill and bit to install conduit connectors into the control box.
•
Power: 120 ~ 240VAC, and appropriate wire.
•
Communications RS485 wiring: twisted pair with shield.
•
Compass or GPS to align wind sensor true North.
•
Mounting screws or bolts to attach the tripod to the mounting location, such as nine 2"X1/4" bolts.
•
Markings and Symbols
WARNING: A potential risk exists if the operating instructions are not followed
General Warning Symbol: This symbol indicates the need to consult the operating instructions provided with the
product.
This symbol indicates the presence of electric shock hazards.
This symbol indicates: Do not apply to or remove from hazardous live conductors.
Direct Current symbol.
Page 4
Draft Copy
A89WS Weather Station (gen 3)
Advertisement
Table of Contents
