A89Ws-Tc1, A89Ws-Tc2: Cell Temperature Kit - Obvius A89WS Installation And Operation Manual

A89WS-TC1, A89WS-TC2: Cell Temperature Kit

Kit contains: Cell temperature probe with cable and plug.
The cell temperature probe is a 10k ohm type 2 thermistor sensor
in a bullet probe configuration. The kit comes in two versions:
TC1 has a 50' cable.
•
TC2 has a 150' cable.
•
The cell temperature probe should be mounted to the back of a
solar panel to measure the panel temperature. Care should be
taken to not damage the solar panel when installing the sensor.
The bullet probe can be glued to the panel, or attached by securing
the probe with a hardware attachment on the panel or panel
holding system.
The probe may also be secured using durable foil tape typically used to seal HVAC systems in outdoor applications. Foil
tape can also be used to secure a probe while glue such as epoxy is curing.
Page 19 Draft Copy A89WS Weather Station (gen 3)