Vermont Castings Radiance RADVTCB Homeowner's Installation And Operating Manual page 14

Radiance Direct Vent Gas Heater
Vertical Termination Cap
CFM Vent Components
The following kits are available to meet the needs of
most installations. All pipe has a 7" outer diameter and
includes a 4" diameter inner section. A (CG) designa-
tion indicates the part is finished in Charcoal Gray paint.
Consult your dealer about other vent parts that may be
appropriate to complete the installation.
Min. Through the Wall Vent Kit
(1) 90-Degree Elbow (CG) (7537517)
(1) 24" Straight pipe (CG) (20001448)
(1) 24" - 42" Adjustable Straight Pipe (20006759)
(1) Side Wall Termination (06508)
(1) Firestop (50534)
(1) Zero-clearance sleeve (54623)
(1) Hardware package (20000160)
(1) Finishing plate (CG) (10000257)
(1) Finishing collar (CG) (56298)
(4) Charcoal Gray flue pipe rings (10001008)
Starter Kit for Below-Grade Termination
(1) Snorkel Termination (7TDVSNORK)
Vertical Termination Kit, 1/12-6/12 Pitch
(1) Combination Horizontal Offset / Roof Support
(1) Vertical Termination
(1) Storm Collar
(1) 1/12-6/12 Flashing
(1) Finishing Plate (CG)
(1) Finishing Collar (CG)
(1) Polished Brass Flue Pipe Ring
(1) Hardware Package
Vertical Termination Kit, 7/12-12/12 Pitch
(1) 7/12 - 12/12 Flashing
and all of the other Vertical Termination parts.
Vertical Termination, Flat Roof
(1) Flat Flashing
1414
and all of the other Vertical Termination parts.
4DT-VC
Twist Lock 12" Straight Pipe (CG)
(1) 12" Non-adjustable Pipe
Twist Lock 12" - 18" Adjustable Pipe
(1) 12" - 18" Adjustable Pipe
Twist Lock 24" Straight Pipe (CG)
(1) 24" Non-adjustable Pipe
Twist Lock 48" Straight Pipe (CG)
(1) 48" Nonadjustable Pipe
Twist Lock 45-Degree Elbow (CG)
7TFSSK
for vertical offsets
(1) 45-degree Elbow
Combination Offset/Roof Support
Attic Insulation Shield
7" Charcoal Gray Pipe Rings, (4)
7" Polished Brass Pipe Rings (4)
Wall Thimble
7TDVSKS
7TDVSKVA
7TDVSKVB
7DVSKVF
7TFSDVP12
7TFSDVP1218
7TFSDVP24
7TFSDVP48
7TFSDVT45
7DVCS
7DVAIS
7FSDRG
7FSDRP
942G
20012697