Listening To The Radio; Presetting Stations Automatically; Listening To A Preset Channel; Using The Start Menu - Panasonic SC-XH70 Operating Instructions Manual

Listening to the radio

You can preset up to 30 channels.
The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
Preparation
Make sure that the FM antenna is connected. (

Presetting stations automatically

1
Press [RADIO]4 to select "FM".
2
Press [MENU]C to select "LOWEST" or
"CURRENT".
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.
§ To change the frequency, refer to "Manual tuning
and presetting".
3
Press and hold [OK]8.
Release the button when "FM AUTO" is displayed.
The tuner starts to preset all the stations it can receive
into the channels in ascending order.

Listening to a preset channel

1
Press [RADIO]4 to select "FM".
2
Press the numbered buttons to select the
channel.
≥To select a 2-digit number
e.g. 12: [S10]2
Alternatively, press [X, W]@.
Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO]4 to select "FM".
2 Press [SEARCH6, SEARCH5]? to select the
frequency.
≥To start automatic tuning, press and hold
[SEARCH6, SEARCH5]? until the frequency
starts scrolling. Tuning stops when a station is found.
To preset the channel
3 While listening to the radio broadcast
Press [OK]8.
4 While the frequency is flashing on the display
Press the numbered buttons to select the channel.
A station previously stored is overwritten when another station is
stored in the same channel preset.
10
[1] [2]

Using the START menu

You can select sound effects, desired source, change the
settings, access playback/menus, etc., by using the
START menu.
1
Press [START]B to show the START menu.
≥When using VIERA Link "HDAVI Control", the TV
7)
also turns on when the START menu is displayed.
e.g.
D V D / C D
2
Press [3, 4]8 to select an item and press [OK]8.
≥To exit, press [START]B.
3
Press [3, 4, 2, 1]8 to make the setting and
press [OK]8.
When "Input Selection" is selected
§
You can select a desired source from the menu.
≥DVD/CD (
AUX ( below), ARC
§
§ "(TV)" will appear beside "AV", "AUX" or "ARC",
indicating the TV audio setting for VIERA Link "HDAVI
Control" (
When "Setup" is selected
You can change the settings for this unit. (
When "Sound" is selected
You can select sound quality settings (
(Equaliser)).
Other selectable items
The items that are displayed will vary depending on the
media and source.
When a disc is loaded or an USB device is connected,
you can also access playback or menus from the START
menu.
e.g. [DVD-V]
DVD/CD
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu)
You can operate the playback with the indicated controls.

Selecting the source using the remote control

Press To select
[DVD]4 DVD/CD
[RADIO]4 FM (
[EXT-IN]4 Each time you press the button:
AV:
AUX:
ARC:
USB:
H o m e C i n e m a
Input Selection
Setup
Sound
13), FM RADIO ( left), AV
( below), USB (
§
16).
Home Cinema
P l a y b a c k D i s c
Playback/menu
TOP MENU(DVD)
MENU(DVD)
access
Input Selection
Setup
left)
For audio input through the SCART
(AV) terminal.
For audio input through the AUX
terminal.
For audio input through the HDMI
AV OUT terminal.
( 18)
( below),
§
18)
18)
12, EQ