Selecting sound mode
1
Press [SOUND]: to select a sound mode.
Each time you press the button:
EQ:
Equaliser
SUBW LVL: Subwoofer Level
C.FOCUS:
Center Focus (Only when "Surround
layout (Recommended)" mode is
selected in "Speaker layout" (
setup).)
2
While the selected mode is displayed, press
[2, 1]8 to make the settings.
Refer to the following for setting details of each sound
effect.
EQ (Equaliser)
You can select sound quality settings.
Each time you press [2, 1]8:
FLAT: Cancel (no effect is added).
HEAVY:Adds punch to rock.
CLEAR:Clarifies higher sounds.
SOFT: For background music.
SUBW LVL (Subwoofer level)
You can adjust the amount of bass. The unit
automatically selects the most suitable setting
according to the type of playback source.
LEVEL 1 ,# LEVEL 2 ,# LEVEL 3 ,# LEVEL 4
^---------------------------------------------------------------------------J
≥The setting you make is retained and recalled
every time you play the same type of source.
C.FOCUS (Center Focus)
(Effective when playing audio containing the
center channel sound or when DOLBY PLII
(
11) is selected.)
You can make the sound of the center speaker
seem like it is coming from within the TV.
ON ,------. OFF
Whisper-mode Surround
You can enhance the audio effect for low volume 5.1-
channel sound. (Convenient for late night viewing.)
Press and hold [–W.SRD]: to show the current
setting.
While the current setting is displayed, press [–W.SRD]:
to change the setting.
ON ,------. OFF
12
Adjusting the speaker level during playback
Only when "Surround layout (Recommended)" mode
is selected in "Speaker layout" (
(Effective when playing 5.1-channel sound or when
DOLBY PLII/"S.SRD" (
1
Press [CH SELECT]F to select the speaker.
Each time you press the button:
e.g. L# C# R# RS# LS# SW
9, Easy
^---------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc
includes a subwoofer channel.
≥When "S" appears, only the surround speaker
channel can be adjusted. Both surround speaker
levels will be adjusted at the same time.
2
While "C", "RS", "LS", "SW" or "S" is selected
Press [3]8 (increase) or [4]8 (decrease) to
adjust the speaker level for each speaker.
C, RS, LS, SW, S: `6 dB to i6 dB
(L, R: Only the balance is adjustable.) (
Adjusting the speaker balance during playback
For "Surround layout (Recommended)"
Front speaker balance
For "Front layout (Alternative)"
Front and surround speaker balance
1
Press [CH SELECT]F to select "L" or "R".
2
While "L" or "R" is selected
Press [2, 1]8 to adjust the speaker balance.
§ Selected mode in "Speaker layout" (
9, Easy setup)
11) is selected.)
below)
mode:
§
mode:
§
9, Easy setup).