Hardware Options Installation; Introduction; Processor Option - HP ProLiant SL250s Gen8 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Processor option

Update the system ROM.
1.
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
Power down the server (on page 14).
2.
Remove the server from the chassis (on page 14).
3.
Place the server on a flat, level work surface.
4.
Remove any necessary components to obtain access to the system board. For procedures to remove
5.
server components, see the maintenance and service guide.
Remove the air baffle.
6.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
Hardware options installation 24