Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Roller Ring
1. The Roller Ring and oven fl oor should be cleaned frequently to prevent
excessive noise.
2. Always replace the Roller Ring and the Glass Tray in their proper positions.
3. The Roller Ring must always be used for cooking along with the Glass Tray.
IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
Examine Your Oven
Unpack oven, remove all packing material and examine the oven for any dam-
age such as dents, broken door latches or cracks in the door. Notify dealer
immediately if oven is damaged. DO NOT install if oven is damaged.
Placement of Oven
1. The oven must be placed on a fl at, stable surface, which is 91.6 cm (36 inches)
height from the ground. Place the front surface of the door 7.6 cm (3 inches) or
more from the counter top edge to avoid accidental tipping of the microwave
oven during normal use. For proper operation, the oven must have suffi cient air
fl ow. Allow 7.6 cm (3 inches) of space on both sides of the oven and 5 cm
(2 inches) of space on top of the oven.
(a) DO NOT block air vents. If they are blocked during operation, the oven may
overheat and be damaged.
(b) DO NOT place oven near a hot, damp surface such as a gas or electric
range, or dishwasher.
(c) DO NOT operate oven when room humidity is excessive.
2. This oven is manufactured for household use only. It is not approved or tested
for mobile vehicle, marine, or commercial use.
Installation
1. DO NOT block air vents. If they are blocked during operation, the oven may
overheat. If the oven overheats, a thermal safety device will turn the oven off.
The oven will remain inoperable until it has cooled.
2. If the oven is designed for installation into a wall cabinet, use the proper trim kit
available from a local Panasonic dealer. Follow all instructions packed with the
kit.
(continued)
INSTALLATION AND
(continued)
5
Hide quick links:
Advertisement
Table of Contents
