Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic NN-GD693S Operating Instructions Manual

This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
• Press Timer/Clock
1.
once.
• Set time, using Time
2.
Select Dial to 5 min-
utes (up to 1 hour and
30 minutes).
3. • Press Start.
Time will count down
without oven
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1. • Enter the desired
Power level (see
page 16 for directions).
Press 5 times
• Set cooking time, using
2.
Time Select Dial to
3 minutes.
3. • Press Timer/Clock
once.
4. • Set stand time, using
Time Select Dial (up to
1 hour and 30 min-
utes).
5. • Press Start.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
Timer Feature
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
To Set Delay Start:
Example: To delay the start of cook-
1.
2.
3.
Press 5 times
4.
5.
NOTE:
1. When each stage fi nishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep fi ve times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time on the display will continue to count
down.
3. Stand time and Delay start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 1 hour and 30 minutes
26
ing for 5 minutes, and cook
at P6 power for 3 minutes.
• Press Timer/Clock
once.
• Set delay time, using
Time Select Dial to 5
minutes (up to 1 hour
and 30 minutes).
• Enter the desired
Power level (see
page 16 for directions).
• Set cooking time using
Time Select Dial.
• Press Start.
Delay time will
count down. Then
cooking will start.