Before Requesting Service - Panasonic NN-GD693S Operating Instructions Manual

Before Requesting Service

These things are normal:
The oven causes
interference with my
TV.
Steam accumulates
on the oven door and
warm air comes from
the oven vents.
Smoke and burnt
smell will occur after
the fi rst use.
PROBLEM
Oven will not turn on.
Oven will not start
cooking.
The Glass Tray
wobbles.
When the oven is
operating, there is noise
coming from the glass
tray.
The symbol " "
appears in the
Display Window.
" " appears in the
display window.
Some radio and TV interference might occur when you cook
with the microwave oven. This interference is similar to the
interference caused by small appliances such as mixers,
vacuums, blow dryers, etc. It does not indicate a problem
with your oven.
During cooking, steam and warm air are given off from the
food. Most of the steam and warm air are removed from the
oven by the air which circulates in the oven cavity. However,
some steam will condense on cooler surfaces such as the
oven door. This is normal. After use, the oven should be
wiped dry (see page 11).
This is not a malfunction and will go away after a few uses.
POSSIBLE CAUSE
The oven is not plugged in securely. Remove plug from outlet, wait 10
Main circuit breaker or main fuse
is tripped or blown.
There is a problem with the outlet. Plug another appliance into the
The door is not closed
completely.
Start Button was not pressed after
programming.
Another program is already
entered into the oven.
The program is not correct.
Stop/Reset Button has been
pressed accidentally.
The Glass Tray is not
positioned properly on the Roller
Ring or there is food under the
Roller Ring.
The Roller Ring and oven
bottom are dirty.
The CHILD LOCK was
activated.
The cavity is overheated.
31
REMEDY
seconds and re-insert.
Reset main circuit breaker or
replace main fuse.
outlet to check if it is working.
Close the oven door securely.
Press Start Button.
Press Stop/Reset Button to
cancel the previous program and
enter new program.
Program again according to the
Operating Instructions.
Program oven again.
Take out Glass Tray and Roller
Ring. Wipe with a damp cloth and
reset Roller Ring and Glass Tray
properly.
Clean these parts according to
Care and Cleaning of your
Microwave oven (see page 11).
Deactivate LOCK by pressing
Stop/Reset Button 3 times.
Operate again after it cools down.
Please open the door in order to
cool the temperature of the cavity
more quickly.