Connecting A Tv - Pioneer BDP-LX88 Operating Instructions Manual

 About the PQLS function
02
PQLS (Precision Quartz Lock System) is a digital audio
transfer control technology using the HDMI control
function. The player's output signals are controlled from
the AV receiver to achieve high sound quality playback
using the receiver's quartz oscillator. This eliminates the
influence of the jitter generated during signal transfer
which can adversely affect the sound quality.
• This player supports the functions below.
– The "PQLS 2ch Audio" function that is activated
when playing music CDs (CD-DAs)
– The "PQLS Multi Surround" function that is
activated when playing all discs (BDs, DVDs, etc.)
with linear PCM audio output
– The "PQLS Bitstream" function that is activated
when playing with bitstream audio output
• The various PQLS functions are activated when a
Pioneer AV receiver supporting the PQLS functions is
connected directly to the HDMI OUT terminal with an
HDMI cable and the player's settings are set as
shown below (page 43).
Control: On
Precision Audio: AUTO or HDMI (PQLS) (BDP-LX88
only)
• Also refer to the AV receiver's operating instructions.
• See the Pioneer website for AV receivers supporting
the PQLS function.
Caution
• The PQLS function may stop working when the video
output resolution is switched. The PQLS function will
start working again once playback is stopped then
restarted.
• Turn on the power of the AV receiver connected to the
HDMI OUT terminal, then start playback of the disc.
18
En

Connecting a TV

See Connecting an AV receiver or amplifier on page 19 to
connect an AV receiver or amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Connect a TV to the HDMI OUT (MAIN) terminal.
BDP-LX88's rear panel
ZERO SIGNAL
HDMI OUT DIGITAL AUDIO OUT
SUB MAIN
OPTICAL COAXIAL
It is also possible to connect to an
AV receiver or amplifier using an
To HDMI
HDMI cable.
input terminal
TV
Caution
• Make sure to set HDMI Mode to Dual or Single
(page 43).
RS-232C
LAN USB
(10/100)
Match the direction of
the plug to the terminal
and insert straight.
Direction of signal flow