Pioneer BDP-LX88 Operating Instructions Manual page 45

Setting Options
Screen Saver Off
1 min
2 min
3 min
Auto Power Off Off
15 min
30 min
Network Standby On
Off
Update USB Storage
Network
Load Default Restore the settings to the factory default.
System Information Check the system version number.
BUDA BUDA Information
BUDA Setup
Explanation
The screen saver is not activated.
・The screen saver will be activated if no operation has been performed for
more than one minute/two minutes/three minutes.
・ During operation of the screen saver, [SCREENSAVER] is displayed on the
front panel display.
・Operating the remote control can deactivate the screen saver.
Select this if you do not want the power to turn off automatically. This is the
default setting for models other than European models.
The power will be automatically turned off if no operation has been performed
for more than 15 minutes or 30 minutes. The default setting for European
models is 15 minutes.
Select this if you want to input power from a mobile device using a dedicated
application (page 6).
Select this if you do not want to use the Network Standby function (described
above).
Select the method of software updating (page 48).
Display and set up the BUDA data on the connected USB device (page 46).
08
45
En