Connecting Audio Cables; Connecting An Av Receiver Or Amplifier Using An Coaxial Digital Audio Cable; Connecting An Av Receiver Or Amplifier Using An Optical Digital Audio Cable (Bdp-Lx88 Only); Connecting The Pre-Main Amplifier Using A Baranced - Pioneer BDP-LX88 Operating Instructions Manual

Connecting audio
02
cables
Connecting an AV receiver or
amplifier using an coaxial
digital audio cable
ANALOG AUDIO OUT
R L
UT
Red White
To audio input
Note
• The volume of analog output audio may be low
depending on the setting of this device and contents
being played.
Connecting an AV receiver or
amplifier using an optical
digital audio cable (BDP-
LX88 only)
ANALOG AUDIO OUT
R
UT
Red
To audio input
20
En
BDP-LX58's rear panel
HDMI OUT
SUB MAIN
Coaxial digital
audio cable
2-channel
(commercially
analog audio
available)
can also be
connected.
To coaxial
digital audio
Direction of
input terminal
signal flow
AV receiver or amplifier
terminals
BDP-LX88's rear panel
NORMAL INVERSION
ZERO SIGNAL
L
HDMI OUT DIGITAL AUDIO OUT
SUB MAIN
White
Optical digital
2-channel
audio cable
analog audio
(commercially
can also be
available)
connected.
To optical
digital audio
Direction of
input terminal
signal flow
terminals AV receiver or amplifier
Connecting the Pre-main
amplifier using a baranced

cable (BDP-LX88 only)

ANALOG AUDIO OUT
R
ZERO
RS-
SIGNAL
DIGITAL OUT LAN
(10/100)
COAXIAL
Direction of
signal flow
Note
• The volume of analog output audio may be low
depending on the setting of this device and contents
being played.
 Balanced output connector
(appearance on unit side; equivalent
to XLR-3-31)
The settings of the balance output terminal can be
changed. Refer to the XLR Terminal Polarity on page 42 for
details.
RS-2
LAN
(10/100)
OPTICAL COAXIAL
BDP-LX88's rear panel
NORMAL INVERSION
L
HDMI OUT
SUB MAIN
UT
Balanced cable
(commercially
available)
To balanced-type
input terminals
Pre-main amplifier,
etc., furnished with
balanced-type input
Audio cable
(commercially available)
To audio (RCA)
input terminals
Pre-main amplifier
with RCA (pin plug)
input connectors
NORMAL INVERSION
ZERO SIGNAL
RS-2
DIGITAL AUDIO OUT LAN
(10/100)
OPTICAL COAXIAL
connectors