Setting The Audio/Video Options; Changing The Audio Options; Operating The Audio Parameter Screen - Pioneer BDP-LX88 Operating Instructions Manual

Chapter 7
07

Setting the Audio/Video options

Changing the Audio options

There are a number of additional sound settings you can
make using the Audio Parameter menu.
TOP MENU
HOME MENU
Note
• It is not possible to open the Audio Parameter screen when any of the Home Menu (Source, Web Contents,
Initial Setup), Video Parameter, Function Menu, Disc Menu, YouTube or Picasa is being displayed.
• It is not possible to open the Audio Parameter screen while 3D contents are being played back.
• When DIRECT function is On, the Audio Parameter setting will not work.
• In Options, the factory default settings are indicated in bold.
Setting
1
Audio Scaler
(BDP-LX88 only)
1, 2
Hi-bit32
(BDP-LX88 only)
1, 2, 3
Up Sampling
(BDP-LX88 only)
1, 2
Digital Filter
(BDP-LX88 only)
Auto Sound Retriever
(BDP-LX88 only)
4
Audio Sync
5
Audio Delay
38
En
AUDIO P. VIDEO P. CONTINUED
YouTube SOURCE
POPUP MENU
POP
TOP
UP
ENTER
RETURN
Options
Manual
Auto
On
Off
x1 (Off)
x2
x4
Slow
Sharp
Off
On
Auto
Manual
0 to 200 (ms)
Operating the Audio
Parameter screen
1 Press AUDIO P. to display the Audio Parameter
screen.
Use / to select the setting you want to adjust,
2
then press ENTER.
Use / to set as necessary, then press ENTER.
3
 Closing the Audio Parameter screen
Press AUDIO P. or
Explanation
The Hi-bit32, Up Sampling and Digital Filter can be configured to the desired
settings.
When Auto is selected, Hi-bit32, Up Sampling and Digital Filter are
automatically set to the optimum settings according to the 2-channel audio
source's sampling frequency and bit rate to achieve high quality playback
sound.
Creates a wider dynamic range with digital sources like CDs, DVDs or BDs. 16-
, 20- and 24-bit PCM as well as compressed audio is requantized to 32 bits, and
the high frequency component is interpolated upon data processing to enable
smoother, more subtle musical expression.
The 2-channel audio source's sampling frequency is increased to the set
multiple to achieve high quality playback sound.
Switches the AUDIO DAC (Digital Audio Converter) digital filter type. One of two
settings can be selected: Slow (soft and warm), Sharp (solid and tight).
With the Auto Sound Retriever function, DSP processing is used to compensate
for the loss of audio data upon compression, improving the sound's sense of
1
density and modulation. Also, when a player supporting the Sound Retriever
Link function is connected to the receiver by HDMI, by setting this to On, the
bitrate information of the compressed audio file being played on the player is
acquired using the Control with HDMI function, and the sound is optimized
based on this information (Sound Retriever Link).
The player automatically adjusts the timing of the video and audio when
connected to a device equipped with the HDMI Audio Sync Correction feature
using an HDMI cable.
Adjust manually.
Some monitors have a slight delay when showing video, so the soundtrack will
be slightly out of sync with the picture. By adding a bit of delay, you can adjust
the sound to match the presentation of the video.
RETURN.