Download Print this page

Program Playback; Selecting Play Mode - Kenwood DPC-X447MP Instruction Manual

Kenwood portable cd player user manual
Hide thumbs Also See for DPC-X447MP:

Advertisement

Playback from the first track 5
PHONE(Phones/ Remote) jacks
VOL
7
HOLD
38
OPEN
EQ HOLD
∞/5
38/7/4/¢
1 Slide the OPEN switch in the direction of the
arrow to open the top cover.
2 Insert disc and close the top cover.
÷ Insert with labeled side up.
÷ Secure the disc by pushing a position near
the center hole unit it clicks.
÷ Close securely by pushing the front cen-
ter position of the top cover unit it clicks.
3 Set the HOLD switch to off.
÷ For the Hold function, read "Hold function".
÷ Before any operation, be sure to set the
HOLD switch to off.
4 Press the 38 key.
÷ The power comes on and playback be-
gins.
÷ Certain CD-R/CD-RW (CD-DA, MP3/WMA)
discs may not be played due to recording
conditions of the discs.
CD-DA:
PLAY
CD
01 00:01
Track number
MP3/WMA:
ID3 Tag display
File:Keep On
01 001 00:01
Forder number
File number
5 Use the VOL knob to adjust the volume.
7
To pause playback temporarily
Press the 38 key during playback states.
÷ Pressing the key again resumes playback.
7
To stop playback
Press the 7 key during playback states.
÷ The total number of tracks and the total
playing time of them will be displayed.
7
To turn power off
After stopping playback, press the 7 key again.
Auto power-off function
If no operation key has been pressed for 1
minutes while the unit is in the stop mode, the
power is turned off automatically to prevent
battery power consumption.
7
Selecting the folder
(Only MP3/WMA)
Use the ∞ or 5 key to select the folder.
÷ Press the 38 key starts playback from the
first file in the selected folder.
7
Skipping tracks
Press the 4 or ¢ key.
÷ When the ¢ key is pressed, playback will skip
to the start of the subsequent track.
÷ Each time the key is pressed, playback
will skip to the next track.
÷ When the 4 key is pressed, playback
will skip to the start of the track being
played back.
÷ Each time the key is pressed, playback
will skip to the previous track.
7
Fast forward, fast reverse
Hold the 4 key or ¢ key pressed during
playback.
÷ Fast forward is engaged by pressing and
holding down key ¢ while playback is in
progress.
÷ Fast reverse is engaged by pressing and
holding down key 4 while playback is in
progress.
÷ Playback will resume when either key is
released.
Hold function
Slide the HOLD switch in the direction of the arrow
to switch the HOLD function on.
÷ When the HOLD switch on the unit is switched
on, the unit's keys cannot be operated.
÷ When the HOLD switch on the remote control
is switched on, the remote control's keys can-
not be operated.
Changing the tone
ASP
Press the EQ key for the following selections.
1 "FLAT"
2 "CLASSIC"
Elapsed time of track
3 "JAZZ"
being played

Selecting Play Mode 6

Elapsed time of track
being played
Press the MODE key for the following selections.
(Press the playback status)
1 One-track repeat ("P1" lights up)
The track being played will be played repeatedly.
÷ To play the next track repeatedly, press the
4 or ¢ key.
2 Album repeat ("PALBUM" lights up)
(Only MP3/WMA)
All of the tracks in the folder containing the track
being played will be played repeatedly.
÷ To play the next folder repeatedly, press the
5 or ∞ key.
3 All-track repeat ("PALL" lights up)
All tracks on the disc will be played repeatedly.
4 Intro Scan ("INTRO" lights up)
The first 10 seconds of all tracks on the disc will
be played in the recorded order.
5 Random playback ("RAND" lights up)
All tracks on the disc will be played in a random
order.
6 Normal playback
4 "ROCK"
5 "POP"
6 "BASS"
38/4/¢
MODE
∞/5
÷ If Intro Scan or Random Playback is selected
while playback is in progress, Intro Scan or
Random Play operation will commence when
the track being played back is over.
÷ The program of tracks is also valid in Re-
peat or Intro Scan playback.

Program playback 7

Favorite tracks (max. 64 tracks) can be programmed.
MODE
1 Press the MODE key during stop status.
÷ Stop status is engaged when the 7 key is
pressed while playback is in progress.
2 Use the 4 or ¢ key to select the folder, and
press the MODE key.
÷ If the medium being played is a CD,
simply select the track to be programmed.
PROG
STOP
00 000 P-01
Use the 4 or ¢ key to select the file, and
press the MODE key.
PROG
STOP
01 000 P-01
÷ Repeat step 2 to select other folders/files or
tracks in the order you want to program them.
÷ Up to 64 tracks can be programmed in this unit.
3 Press the 38 key.
7
To clear the programmed contents
Press the 7 key.
÷ The "PROG" indicator is turned off when the
program is cleared. However, the programmed
contents are stored.
÷ Program mode can be canceled when the 7
key is pressed or the top cover is open while
stop status is engaged. The programmed con-
tents are cleared.
7/4/¢

Advertisement

loading