Compaq Concerto Maintenance And Service Manual page 80

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To avoid damage to the diskette drive cable, determine if the diskette
drive connector on the system board is a ZIF or LIF connector. If it is a
ZIF connector, be sure to release the slide on the connector before
attempting to release or connect the cable.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
6. The diskette drive cable is connected to a LIF or ZIF connector on the
system board. If the system board has a ZIF connector, use a Spudger to
release the slide on the ZIF connector. Release the diskette drive cable
from its connector on the system board (Figure 3-56).