Controlling Ts-590S From A Pc On A Remote Site; Control Program For Ts-590S Freeware - Kenwood 50 MHZ ALL MODE TRANSCEIVER TS-590S User Manual

8 EXPANSIVE APPLICATION SOFTWARE

8.2.5 Controlling TS-590S from a PC on a Remote Site

Remote Station (PC that remotely
Control signal ARCP-590
ARVP-10R or
Audio signal generic VoIP
Caution: When the USB connector is used for input/output of the audio signal on the host station, ARUA-10 is not required
neither.
8.3 New ARCP-590 (Amateur Radio Control Program for
TS-590S) Freeware
ARCP-590 (Amateur Radio Control Program for TS-590S) is software enabling control of the TS-590S
from a PC.
ARCP-590 is available free and can be downloaded from Kenwood's website.
URLs from which ARCP-590 can be downloaded:
http://www.kenwood.com/i/products/info/amateur/software_download.html
As with ARCP-480 for the TS-480S, the new ARCP-590 program is designed to control virtually all of
the functions on the TS-590S transceiver.
54
CONTENTS
controls the transceiver)
Software Hardware
The microphone
and speaker
connected to a
software
PC
Figure 8-1 Main Window of ARCP-590
Type of
Connection
-
Network
Host station (PC that is located
near the TS-590S)
Software Hardware
* Connected to
ARHP-590 the COM or USB
connector
ARVP-10H or * Connected to
generic VoIP the ACC2 or USB
software connector
TS-590S