JVC KS-F184 Service Manual page 6

QQ
3.1.4 Removing the side panel 3 7 63 1515 0
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the screw B and two screws C attaching the side
panel on the left side of the body, and remove the side pan-
el.
3.1.5 Removing the rear panel
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws D, screw E and three screws F at-
taching the rear panel on the back of the body.
3.1.6 Removing the main board
(See Fig.6)
TE
L 13942296513
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, side
panel and rear panel.
(1) Remove the two screws G attaching the main board on the
top chassis.
(2) Disconnect the two connectors
sion) or CN902 (UI3 version) on the main board from the
cassette mechanism assembly.
www
.
1-6 (No.MA181)
http://www.xiaoyu163.com
CN901 and CN721 (UI ver-
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
C B
Side panel
D F
E
Q Q
3 6 7 1 3 1 5
CN721(For UI version)
CN902(For UI3 version)
G
co
.
9 4 2 8
C
Fig.4
F
Rear panel
D
Fig.5
0 5 8 2 9 9 4 2 8
Main board
G
CN901
Fig.6
m
9 9
9 9