Final Set Up - Firegear ADVANTAGE SERIES Installation And Operation Instructions Manual

!!! WARNING !!!
Failure to position the parts in accordance with all included pictures,
diagrams, and drawings, or failure to use only parts specifically
approved with this appliance may result in property damage or
personal injury.
1- Pour the provided Glass over the each burner, filling the burner pans. The Glass should follow the slope of each burner pan, covering each burner
completely. ( SEE FIGURE 35 )
2- Spread the Glowing Embers over the ember burner. ( SEE FIGURE 36 )

FINAL SET UP

Cover the pilot and valve assembly, and for Liquid Propane units, the
air mixer, at the rear of the burner, to protect it, before installing Glass
and Glowing Embers.
FIGURE 35
FIGURE 36
13
!!! IMPORTANT !!!