Firegear ADVANTAGE SERIES Installation And Operation Instructions Manual page 12

HAND HELD REMOTE RECEIVER
See the instructions, packaged with the remote system for directions
on programming the coding switches on both transmitter and receiver.
FIGURE 29 – HAND HELD REMOTE RECEIVER – FRONT VIEW
FIGURE 30 – HAND HELD REMOTE RECEIVER – REAR VIEW
CODE SWITCHES
FIGURE 31 – HAND HELD REMOTE RECEIVER - TOP VIEW
IMPORTANT
TERMINAL BLOCK CONNECTIONS, FOR HAND HELD
TRANSMITTER, REMOTE RECEIVERS, USE THE OUTSIDE
TERMINAL BLOCK RECEPTACLES. ( SEE FIGURE 30 & 31)
WALL MOUNT REMOTE RECEIVER
See the instructions, packaged with the remote system for directions
on programming, ("Learning") both transmitter and receiver.
FIGURE 32 – WALL MOUNT & VARIABLE FLAME
REMOTE RECEIVER - FRONT VIEW
FIGURE 33 – WALL MOUNT & VARIABLE FLAME
REMOTE RECEIVER - REAR VIEW
FIGURE 34 – WALL MOUNT & VARIABLE FLAME
REMOTE RECEIVER - TOP VIEW
TERMINAL BLOCK CONNECTIONS, FOR WALL MOUNT
TRANSMITTER, REMOTE RECEIVERS, USE THE INSIDE
TERMINAL BLOCK RECEPTACLES. ( SEE FIGURE 33 & 34 )
12
IMPORTANT