Table of Contents
Advertisement
Chapter 2: Camera Configuration
COM Port
This page provides the COM port configuration for RS-232 control and RS-
485 control. Serial settings including Baud Rate, Direction, Data Bit, Parity,
Stop Bit and Flow Control can be configured here.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
RS-232 Control
Port
Configures the port number to access the RS-232 device connected to the
COM port over the network, the range is 1025~65535.
Baud Rate/Data Bit/Parity/Stop Bit/Flow Control
Configures the serial settings baud rate, data bit, parity, stop bit and flow
control. Please make sure the serial settings match the RS-232 device's serial
settings.
RS-485 Control
Port
Configures the port number to access the RS-485 device connected to the
COM port over the network, the range is 1025~65535.
Direction/Baud Rate/Data Bit/Parity/Stop Bit/Flow Control
Configures the serial settings, baud rate, data bit, parity, stop bit, flow
control and direction of data transfer. Please make sure the serial settings
match the RS-485 device's serial settings.
52
NCb-231 User Manual
Advertisement
Table of Contents
