Camera Settings Cont; White Balance; Exposure - Nexcom NCb-231 User Manual

Intelligent digital security ip camera

Table of Contents

Chapter 2: Camera Configuration

Camera Settings Cont.

White Balance Mode

Enables or disables the white balance function on the camera. White balance

allows the camera to produce more accurate colors under different lighting

conditions. The following modes can be selected:

Off:

Disables white balance function.

Auto:

Automatically adjusts the white balance to suit the

current lighting condition.

Fixed Outdoor:

Adjusts the white balance for outdoor daylight.

Incandescent:

Adjusts the white balance for indoor light.

Fluorescent:

Adjusts the white balance for fluorescent light.

Exposure Mode

This option configures the anti-flickering function of the camera. If the

image is suffering from flickering under fluorescent light, selecting Auto

will allow the camera to automatically adjust the light frequency to match

the current fluorescent lighting condition and prevent flickering. You can

also manually set it to Anti-Flicker 50Hz, Anti-Flicker 60Hz or Locked.

Exposure Value Adjust

Adjusts the exposure value on the camera, the range is 0 ~ 255. Press the <

button to decrease the value, or > button to increase the value. The default

value is 128.

NCb-231 User Manual

Table of Contents

Do you have a question about the NCb-231 and is the answer not in the manual?

Ncr-303-vhr Ncr-302-vhr