Canon NP6621 Service Manual page 275

3) Remove the two screws
cover from the copier's rear cover.
y
Fig. 5-804
4) Open the ferrite core
three times, and close the ferrite core
thereafter, connect the cable
side and the RDD's cable
Note:
If a conversion connector is found on the cable
from the copier, remove it.
Fig. 5-805
COPYRIGHT © 1998 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and detach the face
t
y
, wind the RDD's cable
;
on the copier
.
o
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
u
Fig. 5-806
5) Fix the RDD in place on the copier's rear cover
with four screws ; use the screws removed
from the copier.
Modular Jack on the Right
Fig. 5-807
INSTALLATION
o
i
y
y
5–29