Canon NP6621 Service Manual page 229

9. Installing the Lens Heater
1) Remove the copyboard glass and the lens
hood.
2) Remove the three screws, and disconnect the
two connectors; then, remove the original size
sensor together with its mount.
1
Figure 4-414
3) Install the lens heater
4) Connect the connector
4
Figure 4-415
COPYRIGHT © 1998 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
with a screw .
.
3
2
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5) Set the mirror heater harness
guide.
5
Figure 4-416
6) Install the original size sensor mount, lens hood,
and copyboard glass.
MECHANICAL SYSTEM
to the cord
4–37