Lamp Power And Reset Shortcuts; Led Signal Readouts - Martin MAC 250 Wash User Manual

Lamp power and reset shortcuts

The control panel buttons can be used to control lamp power and reset the fixture.
• To strike the lamp, press [Enter] and [Up].
• To douse the lamp, press [Enter] and [Down].
• To reset the fixture, press [Menu] and [Up].

LED signal readouts

Four LEDs next to the digital display give additional information about fixture status:
• Ready: fixture is ready for operation.
• DMX: fixture is receiving a valid DMX signal.
• Lamp: lamp is struck and lit.
• Service: fixture is in service mode (for service use only).
16 MAC 250 Wash