Optics; Color Filters - Martin MAC 250 Wash User Manual

Optics

Color filters

S T A N D A R D C O N F I G U R A T I O N
The MAC 250 Wash provides 6 dichroic color filters as shown below.
5
R E P L A C I N G A C O L O R F I L T E R
Danger! Intense heat. Avoid contact by persons and materials. The exterior of the fixture can get
very hot – up to 160° C (320° F). Disconnect the fixture from AC power and allow it to cool
for at least 45 minutes before handling.
Do not remove covers while the fixture is powered on as this exposes dangerous live
electrical circuits, hot surfaces, and a lamp under high pressure.
1. Disconnect the fixture from AC power and allow it to cool.
2. The top and bottom covers look the same, but the top cover can be identified by checking that the text
on the back of the head is oriented correctly as illustrated in Figure 6. Remove the top cover using a
flathead screwdriver to loosen the four quarter-turn screws.
6
1
2
3
3 4
4
Figure 5: Color wheel (viewed from lamp side)
Figure 6: Identifying and removing the upper head cover
1
6
5
2
Optics
Position Color
CTC 5500 - 2900 K
1
Pink 312
2
UV
3
Red 308
4
Green 206
5
Blue 108
6
Table 2: Standard colors
19