Language Setup - Kenwood DNX710EX Instruction Manual

Setup menu
6
7
8
9
6 Sets an angle mark display. (
7 Selects the screen display mode.*1 (
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at
the top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut
at the right and left ends).
8 Displays the Parental Lock screen.*1 (
(See <Parental Level Setup>, page 69)
9 Keep "Auto" to use.*1
⁄
• *1 Disabled when a DVD is being played.
10
p Selects a picture display time. *1
( Middle)
The Display of a JPEG picture is changed.
"Short", "Middle", "Long"
⁄
• *1 Disabled when a DVD is being played.
68 DNX7100

Language Setup

Selects a language you use for the speech and
menus.
1 Select the language item to set
Refer to <DVD Setup> (page 67) and select
[Menu Language], [Subtitle Language] or
[Audio Language].
On)
16:9)
2 Display the Language SETUP screen
Off )
1 Enters a language code.
2 Cancels the language setup and returns to
3 Sets the original audio language.
4 Sets the language and returns to the DVD
5 Clears the language code.
3 Enter a language code
See <DVD Language Codes> (page 97) and
select the desired language.
1
5
the DVD SETUP 1 screen.
(It appears during Audio Language setup.)
SETUP 1 screen.
(It appears after you have entered a
language code.)
2
3
4