Language Setup - Kenwood DNX891HD Instruction Manual

Stream Information
Displays the present source information.
The stream (Dolby Digital, Linear PCM, MPEG,
WMA or AAC) appears.
* These items are disabled when a DVD is
inserted.
DVD/Video CD Operation

Language setup

This setting is for the language used in the
menu, subtitle, and voice. You cannot setup
these items during DVD playback.
1
Touch [SET] of the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
Language Set screen appears.
2
Enter the desired language code and
touch [Enter].
For language code, refer to
Codes (P.133).
Sets the entered language and returns to
the DVD SETUP screen.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• To set the DVD's original language for audio
language, touch [Original].
Return to the Top page
DVD Language
29