Traffic Information; Search For Program Type - Kenwood DNX710EX Instruction Manual

Example: When you receive FM 92.1 MHz
0 9 2
WXYZ
Example: When you receive AM 810 kHz
0 8 1
TUV
⁄
• The operation ends automatically if you do not operate
within 10 seconds.

Traffic Information

When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
1 Set the Traffice information mode
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
⁄
• It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
1
ABC
0

Search for Program Type

A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1 Enter Program Type mode
2 Select a Program Type
2
2
1 Program Type is displayed. Touch to select a
Program Type.
2 Scrolls the Program Type list.
3 Searches for the program type.
It is displayed when the Program type is
selected.
4 Continue to touch more than 2 seconds,
the currently receiving station is registered
to have the selected program type.
5 Returns to the original screen.
3 Search a station of the selected Program
Type
1
3
4
5
English 35