Hands Free Unit Control; Control Screen Function - Kenwood DNX710EX Instruction Manual

Hands Free Unit Control

• You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual
of the Bluetooth Hands Free Box as well.

Control Screen Function

Displaying the control screen and using various
functions.
1 Display the control screen
Press several times until the Control Screen
appears.
2 Display the source select screen
1
1 Displays the status of connection with the
cell-phone.
White: The cell-phone is connected.
Orange: The cell-phone is not connected,
or it is outside the service range.
3 Display the Hands-Free Control screen
58 DNX7100
NAV
2 Displays the Search for Phone Book screen.
3 Displays the Out Going Calls screen.
4 Displays the Incoming Calls screen.
5 Switches between the private and hands-
6 Displays the Hands-Free Set Up screen.
7 Enters three phone numbers for quick
8 Enters a phone number.
9 Displays the signal strength.*
p Displays the present Auto Answering status
q Displays the battery drain of the cell-
w Starts the call.
e Ends the call.
r Clears the entered phone number.
t Returns to the previous screen.
16
2 8
3
4
5
14
Refer to <Calling by Phone Book> (page 60).
Refer to <Redialing> (page 62).
Refer to <Redialing> (page 62).
free modes (only when a call in progress).
Refer to <Setting Up the Hands-Free
Phone> (page 63).
dialing.
Refer to <Quick Dialing> (page 60).
Refer to <When Dialing> (page 59).
The more the number of bar segments, the
stronger the signal.
When Auto Answering is on:
When Auto Answering is off:
phone.*
The more the number of bar segments, the
higher the battery level.
Clears the phone number being entered.
9 10
11
12
13
7
6
15
AUTO