Traffic Information; Tuner Setup - Kenwood DNX9180DABS Instructions Manual

Traffic Information (FM only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts. However, this feature requires
a Radio Data System that includes the TI
information.
1
Touch [TI].
h Traffic information mode is set.
h
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.

Tuner Setup

You can set tuner related parameters.
1
Touch [
].
h Radio SETUP screen appears. h
2
Set each item as follows.
■
[NEWS]
Sets a news bulletin interrupt time. Default
is "OFF".
■ [AF]
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is "OFF".
■
[Regional]
Sets whether to switch to the station only
in the specific region using the "AF" control.
Default is "OFF".
[LO.S] (FM only)
■
Turns the Local Seek function on or off.
[Auto TP Seek]
■
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is "ON".
[Language Select]
■
Selects a display language for the PTY
function.
[Aerial Control]
■
Allows you to turn off the Radio Data System
function to prevent the motor-driven
antenna from extending. Default is "ON".
Radio
41
English