Adjusting The Picture Quality - Toshiba 58L9300UC User Manual

NOTE
The picture mode you select affects the current input only. You can select a
different picture mode for each input.

Adjusting the picture quality

The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
Selection
Backlight*
Contrast
Brightness
Color
Tint
Sharpness
* Backlight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to 0. (Settings are stored in memory.)
NOTE
Some settings cannot be adjusted when the picture mode is set to
AutoView.
To adjust the picture quality:
1 Press the SETUP button.
2 Select Picture and press the OK button.
3 Press the p / q (arrow) buttons to select the setting you would
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or
Sharpness).
4 Press the u (arrow) button.
5 Press the t / u (arrow) buttons to adjust the setting.
6 Press the EXIT button.
NOTE
v
v
To reset to the factory defaults:
1 Press the SETUP button.
2 Select Picture > Reset.
Press ( t )
Darker
Lower
Darker
Paler
Reddish
Softer
Any picture settings that you adjust affect the current input only.
You can adjust the picture quality separately for each input.
Depending on a Sharpness value, the Resolution+ effect may be
reduced.
Get other manuals https://www.bkmanuals.com
Picture and Sound Controls
Adjusting the picture
Press ( u )
Lighter
Higher
Lighter
Deeper
Greenish
Sharper
109