Zone Control; Space Enhancer - Kenwood DDX7034BT Instruction Manual

Zone Control

You can set the front and rear audio source.
1 Display the Zone Control screen
> >
Touch [ ] [ ]
2 Set the Zone Control
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
• There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 60), <Space Enhancer> (page
61), <Position> (page 62), <DSP Bypass Control> (page
76), <Speaker Setup> (page 76), and <Car Type (DTA)
Setup> (page 77) are not available.
[Zone Control]. (page 59)

Space Enhancer

You can enhance the soundscape.
1 Display the Space Enhancer screen
> >
Touch [ ] [ ]
59)
2 Set the Space Enhancer
1 Sets the soundscape level.
⁄
• You cannot set Space Enhancer in tuner source.
[Space Enhancer]. (page
1 1 1
English 61