Ipod Control; Playback Screen; Easy Control Screen - Kenwood DDX7034BT Instruction Manual

iPod Control

You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.

Playback Screen

Basic functions are available even when the
playback screen is displayed.
1 Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2 Operation on the Playback Screen
1
1, 3 Selects the music/video.
2 Not effective
4 Displays Source Information Screen.
⁄
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
• Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
• When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
• If the played song is not a video content, "No Video
Signal" is displayed on the video screen.
2
3
4

Easy Control Screen

Displays the basic operation buttons on the
screen.
1 Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
2 Operation on the Easy Control Screen
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[4], [¢] Music/Video Search.
[38] Plays or pauses.
1 1 1
2 2 2
3 3 3
English 27