Receive Mode; Direct Search - Kenwood DDX7034BT Instruction Manual

HD Radio Control (North American sales area only)

Receive mode

Sets the radio broadcasts receive mode.
1 Display the Source
See <Source Control Screen> (page 42).
2 Display the Receive mode screen
3 Select the receive mode
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
44 DNX7140/DNX7000EX/DDX714/DDX7034BT
Control Screen

Direct Search

Tuning in by entering the desired frequency or
channel number.
KTC-HR300 (optional accessory) connected only.
1 Display the Source
See <Source Control Screen> (page 42).
2 Start Direct Search
3 Enter the frequency or channel number
1 1 1
1 Enters the frequency or channel number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
4 Tune in the frequency or channel
Control Screen