Dvd Setup - Kenwood DDX7034BT Instruction Manual

Setup Menu
3 Set a delay time
Make fine adjustment of the delay time of the
speaker output specified at <Setup the Car
Type> to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
78 DNX7140/DNX7000EX/DDX714/DDX7034BT
+3.4feet
1.6feet
2.5feet
5feet
+2.5feet
+0feet

DVD Setup

You can set up the DVD play.
1 Display the DVD Setup screen
>
Touch [ ] [
2 Set each item
[Menu Language] Selects a disc menu
1
language.*
(See <DVD Language Setup>, page 79)
[Subtitle Language] Selects a subtitle
1
language.*
(See <DVD Language Setup>, page 79)
[Audio Language] Selects an audio
1
language.*
(See <DVD Language Setup>, page 79)
[Dynamic Range Control] Sets the dynamic
1
range.* ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "ON")
>
] [DVD SETUP]. (page 63)