Microfiber Pads - McCulloch MC1385 Owner's Manual

MICROFIBER PADS

1. Lay one Microfiber Pad on flat surface, with two fastener strips facing upward.
2. Align Mop Head with Microfiber Pad. Make sure Mop Head is oriented with Pad as shown,
and centered as best as possible (See figure 2-A).
3. Press Mop Head firmly down onto Microfiber Pad. Fastener strips will adhere to Pad Grips on
underside of Mop Head. Pad should now be attached and ready for use (See figure 2-B).
CAUTION: Use care when handling a recently used Microfiber Pad, as it may still be hot.
NOTE: Microfiber Pads are machine washable. To avoid picking up lint, washing sepa-
rately from other fabrics is recommended. Only use liquid detergent. Avoid using any
fabric softeners or bleach. Air drying is recommended; machine drying on a low heat
or air dry setting is acceptable as well.
FIGURE 2
A
The Mop Head and Microfiber Pads are perfect for use on these hard floor surfaces:
•
Sealed Hardwood
•
Stained Concrete
IMPORTANT: Do not use on unsealed hardwood or unglazed ceramic surfaces. Sur-
faces that are not properly sealed may be warped or damaged by exposure to heat and
moisture.
Care should also be taken when steaming sealed hardwood floors, as prolonged ex-
posure to steam in a single spot may cause damage and discoloration. To avoid this,
keep the Mop Head in constant motion on these surfaces.
Steam may remove the sheen from some floors that have been treated with wax.
Extremely rough textured floors may tear or damage Microfiber Pads.
Before steaming any flooring, it is recommended to consult the manufacturer's guide-
lines. For flooring in question, always test on a small inconspicuous area before pro-
ceeding.
Assembling Your Deluxe Canister
Steam System
•
Sealed Laminate
•
Linoleum
B
•
Glazed Ceramic
•
Granite
• •
Marble Tile
•
Vinyl
ENGLISH | 9