Related Manuals for McCulloch MC1226
Summary of Contents for McCulloch MC1226
- Page 1 MODEL MC1226 Handheld Steam Cleaner by Top Innovations, Inc. Please read all instructions before use. Mail in your warranty registration card.
- Page 2 ETTER FROM THE Dear Valued Customer, Congratulations on purchasing your new MC1226 Handheld Steam Cleaner. This versatile and convenient product places the cleaning power of steam in a compact and lightweight appliance that is easy to take anywhere you need to clean.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. WARNING: To reduce the risk of electrical shock, this appliance has a grounded (three-pronged) plug. - Page 4 13. Do not use unit where aerosol-based products are being used, or where oxygen is being administered. 14. Unit is only meant to be used with recommended MC1226 accessories. Using other types of attachments may cause damage to unit or injury.
- Page 5 RODUCT NFORMATION The following features and accessories are included with your Handheld Steam Cleaner. Carefully inspect packing material for all parts listed below. To obtain possible missing parts, refer to the Customer Support section on Page 14 of this manual. &...
- Page 6 RODUCT NFORMATION • The Steam Nozzle (1) emits the flow of hot, penetrating steam whenever the Steam Button is pressed and held. CAUTION: Do not direct steam towards surfaces that may be damaged by extreme heat or moisture. • The Boiler Cap (2) is designed to safely contain steam inside the Boiler. The Boiler Cap must be unscrewed and removed in order to fill the Boiler with water.
- Page 7 SSEMBLING THE ANDHELD TEAM LEANER CONNECTING JET NOZZLE / WIDE NOZZLE WARNING: DO NOT attempt to connect any accessories while unit is emitting steam. Doing so could result in burns or other injury. 1. Insert cylinder on back of Jet Nozzle or Wide Nozzle (FIGURE 1) into opening of Steam Nozzle (FIGURE 2).
- Page 8 SSEMBLING THE ANDHELD TEAM LEANER CONNECTING UTILITY BRUSHES NOTE: Both Nylon Utility Brushes and the Brass Utility Brush are attached in the same manner. 1. Begin by aligning hexagonal-shaped hole on back of Utility Brush with hexagonal tip of the Jet Nozzle (FIGURE 4).
- Page 9 SSEMBLING THE ANDHELD TEAM LEANER CONNECTING SQUEEGEE 1. Connect Squeegee to Wide Nozzle by inserting hook tabs on bottom of Squeegee (FIGURE 6-A) into slots on bottom of Wide Steam Nozzle (FIGURE 6-B). 2. Swing Squeegee backwards until hook latch on back snaps over tab on top of Wide Nozzle.
- Page 10 SING THE ANDHELD TEAM LEANER FILLING BOILER WITH WATER 1. Place Handheld Steam Cleaner on a flat, level surface. 2. Make sure electrical cord is unplugged from outlet. 3. If unit has been in use, allow at least 5 minutes for Boiler to cool. Press and hold Steam Button to ensure that any remaining steam has been released.
- Page 11 SING THE ANDHELD TEAM LEANER OPERATING THE HANDHELD STEAM CLEANER Before operating, make sure all desired accessories are connected and Boiler is filled with the correct amount of water (refer to Pages 7-10 for details). 1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Plug power cord into a convenient 3-prong electrical outlet.
-
Page 12: Proper Storage
& S TORAGE UIDELINES PROPER STORAGE Preparing your Handheld Steam Cleaner for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Unplug power cord from electrical outlet. 2. Allow unit to cool for at least 30 minutes. Press Steam Button to release remaining steam pressure. - Page 13 ROUBLESHOOTING UIDE PROBLEM POSSIBLE CAUSE SOLUTION Unit fails to heat up. Heating Unit is not plugged in. Plug power cord into electrical Indicator Light DOES NOT outlet. illuminate. Household circuit breaker / ground Reset circuit breaker / ground fault fault interrupter has tripped or interrupter, or replace fuse.
-
Page 14: Customer Support
& N USTOMER UPPORT OTES CUSTOMER SUPPORT For problems with your Handheld Steam Cleaner, please refer to the troubleshooting guide located on Page 13. Additional inquiries should be directed to our Customer Support services through our Web site, www.TopInnovations.com, on the Contact Us Web page. If you do not have internet access, you may also contact our Customer Support Department by telephone, at 1-800-711-6617 or 1-816-584-9700, ext. -
Page 15: One-Year Limited Warranty
ARRANTY NFORMATION You must call Top Innovations Warranty Service at (800) 711-6617 and obtain a Return Authorization Number before returning any product for any reason. 30-DAY MONEY BACK POLICY If this item does not meet your expectations, it may be returned within 30 days of the date of purchase for either a replacement or full refund of the purchase price less any shipping charges. - Page 16 Top Innovations, Inc. 6655 Troost Ave. • Kansas City, MO 64131 TEL: (800) 711-6617 / (816) 584-9700 FAX: (816) 584-9066 www.TopInnovations.com customerservice@topinnovations.com PRINTED IN CHINA V080520...