Storing Stations Manually - Kenwood KRF-X9992D Connection And Setup Manual

Chapter Two : Setting Up PowerTouch

Storing Stations Manually

1. Touch on the Main menu to access the
Music menu.
2. Touch on the Music menu to access the
Tuner controls.
3. Touch to choose the receiving band.
4. Touch to switch between Auto tuning and
Manual tuning. Select Manual if you experience
interference due to weak radio signals.
5. Choose the station you want to store using one
of the following methods:
• Touch or until the station's broad-
cast frequency appears.
• Touch and enter the broadcast
frequency using the 10key pad.
(e.g.; To select FM 108.0 MHz, enter 1, 0, 8,
0, 0, and )
6. Touch at the top of the screen:
7. Touch a storage button. Use or
more storage buttons.
If you choose a storage button that already has a
station assigned, the new station will replace the
previously-stored station.
Audio-Video Receiver KRF-X9992D
8. (Optional) Touch
station in the Preset Memory menu:
• Use the stylus to select characters from the
keyboard.
• Touch to access to lowercase characters.
Touch it again to access special characters
(such as @, !, &, etc.). Touch it a third time
to return to uppercase characters.
• Touch or to move back and forth
between the characters.
• Touch (backspace) to clear the last
character you entered. Touch
the characters in the line.
• Touch to save your title.
to access
9. Touch to tune to the newly saved station
and return to the Tuner controls.
10. Repeat steps 3 through 9 for each station you
want to store.
to enter a name for the
41
to delete all