Chapter 5: Paper And Supplies; Ordering From Cognitivetpg; Ordering Thermal Paper; Thermal Paper Specifications - CognitiveTPG A799 User Manual

Chapter 5: Paper and Supplies

Ordering from CognitiveTPG

Printer parts, accessories, and small quantities of paper can be ordered directly from CognitiveTPG. While the
CognitiveTPG part numbers are listed here for your convenience, keep in mind that these numbers may change before this
guide is outdated. To place an order or get more non-technical information, call your CognitiveTPG representative or the
sales line at (800) 732-8950.
CognitiveTPG is able to provide paper in small lots to facilitate product evaluation and testing. Contact your
CognitiveTPG representative for more information on ordering.

Ordering thermal paper

Thermal paper specifications

The printer requires qualified thermal paper with the following dimensions:
Width
58 ± 0.2 mm (2.28 ± 0.01")
60 ± 0.2 mm (2.36 ± 0.01")
80 ± 0.2 mm (3.15 ± 0.01")
82.5 ± 0.2 mm (3.25 ± 0.01")
The paper must not be attached at the core. Use paper with a colored stripe at the end to indicate that the paper is running
low, required when the printer is positioned vertically.
The above figures are based on a core diameter of 22 ± 0.5 mm (0.87") outside,11.5 ± 0.5 mm (0.45") inside.
11/2012
Diameter Length
90 mm max. (3.54") 322' nominal
90 mm max. (3.54") 322' nominal
90 mm max. (3.54") 322' nominal
90 mm max. (3.54") 322' nominal
A799-UG00001 Rev. D
Chapter 5: Paper and Supplies
A799 Two-Color Thermal Receipt Printer: User Guide
33