Chapter 5: Paper And Supplies; Ordering From Tpg; Ordering Thermal Paper; Thermal Paper Speci Cations - CognitiveTPG A798 User Manual

Chapter 5: Paper and Supplies

Ordering from TPG

Printer parts, accessories, and small quantities of paper can be ordered directly from TPG. While the TPG part numbers are
listed here for your convenience, keep in mind that these numbers may change before this guide is outdated. To place an
order or get more non-technical information, call your TPG representative or the sales line at (800) 732-8950.
TPG is able to provide paper in small lots to facilitate product evaluation and testing. Contact your TPG representative for
more information on ordering.

Ordering thermal paper

Thermal paper speci cations

The printer requires qualified thermal paper with the following dimensions:
Width
58 ± 0.2 mm (2.28 ± 0.01")
60 ± 0.2 mm (2.36 ± 0.01")
80 ± 0.2 mm (3.15 ± 0.01")
82.5 ± 0.2 mm (3.25 ± 0.01")
The paper must not be attached at the core. Use paper with a colored stripe at the end to indicate that the paper is running
low, required when the printer is positioned vertically.
The above figures are based on a core diameter of 22 ± 0.5 mm (0.87") outside,11.5 ± 0.5 mm (0.45") inside.
10/07 10/07
Diameter
90 mm max. (3.54")
90 mm max. (3.54")
90 mm max. (3.54")
90 mm max. (3.54")
A798-UG00001 Rev. A A798-UG00001 Rev. A
Chapter 5: Paper and Supplies
Length
322' nominal
322' nominal
322' nominal
322' nominal
A798 Thermal Receipt Printer: User Guide A798 Thermal Receipt Printer: User Guide
29